Marine Navigation & Instruments - Transducer Accessories
Airmar Furuno 10-Pin Mix Match Cable f/600W Non-CHIRP Transducers [MM-10FUR]
Furuno 10-Pin Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable...
Airmar MM-9N Mix Match Cable f/Simrad XSONIC Non-CHIRP Transducers [MM-9N]
MM-9N Mix & Match Cable for Simrad XSONIC Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable...
Airmar Mix Match Cable f/Raymarine 600W Non-CHIRP Transducers [MM-RAY]
Mix & Match Cable for Raymarine 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer...
Airmar MM-8G Mix Match Cable f/600W Non-CHIRP Transducers [MM-8G]
MM-8G Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer...
Airmar Furuno 12-Pin Mix Match Cable f/CHIRP Dual Element Transducers [MMC-12F]
Furuno 12-Pin Mix & Match Cable for CHIRP Dual Element TransducersFor use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000 watts).This product may not be returned to...
Airmar 60WR-1 Crows Foot Transducer Wrench [60WR-1]
60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches...
Airmar 164WR-1 Crows Foot Transducer Wrench [164WR-1]
164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches...
Airmar 10-Conductor In-Line Cable Splice - IP67 [D00342H]
10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can...
Airmar Navico 9-Pin Mix Match Chirp Cable - 1M [MMC-9N]
Navico 9-Pin Mix & Match Chirp Cable - 1MAirmar's 9-Pin Mix & Match Chirp Cable for Navico Med and High or Highwide TransducersFeatures: Length: 1M 9-Pin for Med, High, and...
Airmar Navico 9-Pin Dual Mix Match Cable f/Dual Element Transducers [MMC-9N2]
Navico 9-Pin Dual Mix & Match Cable for Dual Element TransducersFor dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment Mix and Match Cables for CHIRP TransducersMany CHIRP transducers are now made as Mix...
Airmar 175WR-4 Transducer Housing Wrench [175WR-4]
175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use...
Airmar 75WR-2 Transducer Hull Nut Wrench [75WR-2]
75WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this...