Stainless Hold-Down BracketStainless hold-down bracket for low-profile bilge water pickups. BRACKETS ARE NOT INCLUDED WITH BILGE-B-DRY ORDERS. If needed, use the stainless hold-down bracket to help secure your low-profile bilge...
Drain Valve Lubricant - Bilingual - 24oz Features: Prevents sticky valves Restores operation Coats plumbing lines for smooth tank outflow Works in both grey and black water tanks Lubricating additive...
Air Blower 750 Flex - 12V6″ flex mounted marine ventilation 12V radial blower with capacity 750 m3 per h, 441 CFM. Inlet 150mm, outlet 103mm. Body in hermoplastic PA6 high...
Flangemount BlowerDC 250 CFM Flangemount 4" Blower Tough Reinforced Plastic Housing Mounts to any flat surface Slip-on Inlet Ducting Connection Efficient High Volume Air Flow Low-Current Draw Corrosion-Resistant Materials Throughout...
Ballast King Bronze DC Pump without Switch - 15 GPMWakeboard and Ski Boat Ballast PumpFeatures: Flow rate: 15 US gallons/min (57 Litres/min) Self-priming from dry up to 1.2m (4ft) Adds...
Swivel Nut Strainer - 1/2" Pipe Inlet - Clear BowlClean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump. Screws directly on the...
ARG-2503 Sight Glass for ARG-2500 SeriesFeatures: Sight Glass Clear Specifically for ARG-2500 Series
Bronze Pipe Nipple - 1" NPT Features: Cast-in wrench flat simplifies installation and removal NPT x NPT Connection C83600 Bronze Full flow Note-C83600 bronze fittings are not in compliance...
2" NPT Bronze 45 Degree Pipe to 2" Hose Features: 45 degree Male NPT x Hose connection C83600 Bronze Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in...
1-1/2"" NPT x 1-1/2" ID Stainless Steel Pipe to Hose Straight Fitting Features: Male NPT x Hose connection #316 Stainless Steel Sizes from 1/2" to 3" Standard Flow NSF-61 compliant Suitable...
1/2" NPT Bronze In-Line Ball ValveFeatures: Female NPT Threads 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or...
Backing Block for 3/4" & 1" SeacocksFeatures: Each size fits multiple seacock sizes Press threaded brass inserts into the hull side of the backing block into the holes that match...