Sailing

Double Jaw Rigging Toggle - 5/16" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins....

"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

Open Body Jaw to Swage Turnbuckle for 3/16" WireClassic, traditional design. Forged silicon bronze body with T-316 stainless ends.Specifications: 3/16" Wire 1/4" Pin 3" adj.

Single Threaded Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut.

Spreader Flag Halyard KitIncludes 40ft. of polyester line, block with bail and shroud cleat.

Hinged Pad Eye- 5/16"C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the...

"T" Style Toggle Jaw for 1/8" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

Short Adjuster for 3/16" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications: 3/16" Wire 1/4" Pin 1" adj....

Single Threaded Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut.

Single Swivel Gate Eye for 1/8" WireA single eye is used on one end of the gate area to attach the gate hook.

Deck Toggle "T" Style for 3/16" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.

Single Swivel Gate Eye for 3/16" WireA single eye is used on one end of the gate area to attach the gate hook.